A horizontal mixer is a machine used for mixing. Under the action of the inner and outer screw belts on the mixing shaft, the material is flipped within the range of the cylinder. The inner screw belt pushes the material from the middle to the two sides, and the outer screw belt pushes the material from the two sides to the center. The material that permeates back and forth moves and changes radially under the rotation of the screw belt, forming a convection cycle that enables the material to be quickly and uniformly mixed in a short time. The two end shaft seals are specially sealed, and the powder liquid does not leak. The cost of replacing sealing consumables is low and easy, making it a high-efficiency mixing equipment with wide applications, strong adaptability, and good effects.

Shenyang Jinggong Huazhiyi Machinery produces a variety of mixers suitable for mixing powders, such as horizontal mixers, high-speed mixers, high-speed pulverizers, V-type mixers, double cone mixers, etc.

Introduction to high-speed mixer products: Adopting the design concept of mirror stainless steel powder mixing barrel+welder+new high-speed Usage of the toner mixer: Turn on the power of the pigment mixer, loosen the chassis under the toner barrel to the left, remove the toner barrel, load various toner pigment formulas, cover the lid, install the barrel on the chassis, rotate the pigment mixer chassis to the right, align the mixing shaft with the transmission slot and tighten it, and adjust the time according to the requirements. Press the start button to start mixing and dispersing, and the time will automatically stop.

Laundry powder mixer is a powder mixer for daily chemical plants.

This horizontal mixer has high mixing degree and less residue, which is suitable for mixing organic fertilizer and inorganic fertilizer. The specific characteristics are: the materials are fully mixed, thus improving the mixing uniformity. The use of a novel rotor structure allows the clearance between the rotor and the casing to be adjusted to close to zero, effectively reducing the residual amount of materials. The special rotor design of the machine can also crush large materials. The overall structure is more reasonable, the appearance is beautiful, and the operation and maintenance are convenient.