The latest quotation and product introduction of food grade stainless steel reactor in 2022
Product features of food grade stainless steel reactor:
1. It adopts non-volatile solvent formula. The product is liquid and has low viscosity. It is easy to paint on the surface of cement concrete to form a coating. The connection is firm, this product is used with glass fiber or carbon fiber, that is, epoxy glass fiber reinforced plastic, which forms a layer of steel shell on the cement surface, which can strengthen the cement structure, waterproof, strengthen the cement layer and make it waterproof and impermeable.
2. It is environmentally friendly and tasteless, does not contain volatile solvents, and basically does not shrink when hardened.
3. It has good toughness and impact resistance. There is no change in performance within the range of -50 degrees to 180 degrees.
4. Long operating time and high bonding strength after curing.
5. It has good resistance to water, oil, alkali and acid medium.
Precautions for food grade stainless steel reactor:
1. Please check whether the equipment is seriously damaged or deformed during transportation, and check whether the fasteners of the equipment are loose.
2. Please use pre-embedded anchor bolts to install the equipment horizontally on a firm basis.
3. Please carry out the correct installation of equipment, electrical control devices and accessories under the guidance of professionals, and check whether the pipeline is smooth, whether the installed instruments are correct, and whether there is any damage. Before starting the device, please check whether there are people or objects that affect the normal operation of the device inside and outside the device to avoid danger.
4. After installation, please do a test run for a few seconds, and make sure that there is no electrical short circuit or abnormal sound before you can carry out a short test run.
5. If the mixing tank is equipped with a mechanical seal, an appropriate amount of 10# or sewing machine oil must be injected into the mechanical seal lubrication groove before the main engine is started, and cooling water must be introduced into the mechanical seal cooling cavity, so that the mechanical seal device can be well Lubricate and cool. The mechanical seal is not adjusted at the factory. After the installation is completed, the mechanical seal can be adjusted to the correct position according to the installation and operation instructions before normal operation.
6. After the equipment is in normal operation, please check the bearing temperature, running smoothness, tightness, etc., and whether the instrument is normal, and then start feeding and running after confirming that it is normal.
The future development trend of the reactor:
1. Large volume, which is an effective way and development trend to increase production, reduce quality errors between mass production, and reduce product costs. Most of the reaction kettles used for dye production are below 6000L in China, and some up to 30m3 in other industries; in foreign countries, there are 20000-40000L in the dye industry, while in other industries it can reach 120 m3.
2. The agitator of the reaction kettle has been developed from a single agitator to a forced circulation with a double agitator or an external pump. In addition to being equipped with a stirrer, the development trend of the reaction kettle also makes the kettle body rotate along the horizontal line, thereby increasing the reaction speed.
3. Replace the cumbersome manual operation with production automation and continuity. If program control is adopted, it can not only ensure stable production, improve product quality, increase income, reduce manual labor, and reduce environmental pollution.
4. Reasonably utilize heat energy, select process operating conditions, strengthen thermal insulation measures, improve heat transfer efficiency, minimize heat loss, and fully utilize waste heat or heat generated after reaction. The application of heat pipe technology will be the development trend of the reactor in the future.